Surgical Technologies Medical Education
Triton Quiz

Back To Quizzes
1  The Triton System may be connected directly to a gas source.
A. True
B. False
Please choose the best answer:

A B

2  The Triton hose connects to the:
A. High Torque (HT) Handpiece
B. Micro-Oscillating Saw
C. Micro-Sagittal Saw
D. Micro-Reciprocating Saw
E. All of the above
Please choose the best answer:

A B C D E

3  What is the normal operating pressure for the Triton System when it is directly connected to a gas source?
A. 120 psi (8.3 bar)
B. 150 psi (10.3 bar)
C. 100 psi (7 bar)
D. 200 psi (13.8 bar)
E. 80psi (5.5 bar)
Please choose the best answer:

A B C D E

4  When the Triton System and the pneumatic motor are being used together in the pneumatic control unit, the air pressure is set in accordance with the pneumatic motor pressure requirements (80-120 psi).
A. True
B. False
Please choose the best answer:

A B

5  The Quick Release Button on the High Torque Handpiece is used to:
A. Install Triton attachments
B. Remove Triton attachments
C. Remove Triton hose
D. A and B
Please choose the best answer:

A B C D

6  The Triton is a fixed speed system.
A. True
B. False
Please choose the best answer:

A B

7  Always install Triton handpieces, attachments, saw blades and other items with the Handpiece in the “On” position.
A. True
B. False
Please choose the best answer:

True False

8  From the following list, select the “Safe” position (s) for the High Torque Handpiece:
A. Trigger control turned to either side
B. Forward/Reverse switch in middle position
C. Trigger control depressed
D. None of the above
E. A and B
Please choose the best answer:

A B C D E

9  The Sagittal Saw Attachment:
A. May be installed in the High Torque Handpiece in 12 different positions
B. Uses the Sagittal Saw Key to install blades
C. Uses the Sagittal Saw Key to remove blades
D. All of the above
E. A and B
Please choose the best answer:

A B C D E

10  After saw blades are installed onto the handpiece, the Triton System should be run briefly and blades retightened.
A. True
B. False
Please choose the best answer:

True False

11  Jacobs Chucks are available in:
A. 5/32”
B. ¼”
C. 1/8” keyless
D. ¼” keyless
E. All of the above
Please choose the best answer:

A B C D E

12  Blades are installed in the Micro-Oscillating Saw Handpiece:
A. Using the Oscillating Key
B. In the “Safe” position
C. With the blade under the washer
D. None of the above
E. All of the above
Please choose the best answer:

A B C D E

13  When cleaning the Triton System, it is important to:
A. Lubricate the handpieces
B. Use the ultrasonic washer/sterilizer
C. Leave the Handpiece attached to the hose
D. None of the above
Please choose the best answer:

A B C D

14  Attachments may be loaded prior to connecting the High Torque Handpiece.
A. True
B. False
Please choose the best answer:

True False

15  A key is used to secure blades in the reciprocating saw.
A. True
B. False
Please choose the best answer:

True False

16  When using a chuck attachment with a drill bit:
A. Drill with the High Torque Handpiece in the forward position
B. Drill with the High Torque Handpiece in the reverse position
C. Reduce the pressure
D. A and C
E. None of the above
Please choose the best answer:

A B C D E

17  The Wire Collet Attachment accepts pins up to 1.6mm (.062”) in diameter.
A. True
B. False
Please choose the best answer:

A B

18  The Pin Collet Attachment accepts wires up to 3.2mm (.125”) in diameter.
A. True
B. False
Please choose the best answer:

A B

19  The Cannulated Extension is used with the:
A. Jacobs Chuck
B. Pin Collet
C. Wire Collet
D. B and C
E. None of the above
Please choose the best answer:

A B C D E

20  Remove attachments in the “Safe” position.
A. True
B. False
Please choose the best answer:

A B

21  High Torque Sagittal saw blades may be used in the Micro Sagittal Saw Handpiece.
A. True
B. False
Please choose the best answer:

A B

22  The hose for the Triton may not easily insert into the Triton Handpieces if:
A. The hose fitting is damaged
B. The O-ring in the Handpiece is dried out
C. The pressure is set to high
D. A and B
Please choose the best answer:

A B C D

23  A key is used with the AO/Synthes Chuck and Trinkle Chuck Attachments.
A. True
B. False
Please choose the best answer:

A B

24  The non-cannulated Handle Extension:
A. Fits onto the High Torque Handpiece
B. Provides balance control
C. Is used with the Pin Collet Handpiece
D. A and B
E. All of the above
Please choose the best answer:

A B C D E

25  Items are installed into Hudson and Zimmer chucks by:
A. Using the key
B. Using the Extension Handle
C. Pulling back on the Attachment Collar
D. Using the Cannulated Extension
E. None of the above
Please choose the best answer:

A B C D E

 

 

Quiz Results



Final Score: out of


Back To Quizzes